10ft Used Raised Bunded Store – Cargo Worthy – Blue

This 10ft raised bunded store is a new one-trip Cor-Ten steel container modified with a 300mm raised bund floor for the storage of chemical and hazardous materials. The 3mm Durbar chequer plate floor welds directly into the container base and rises 300mm above ground level — creating a deep liquid-tight sump that holds significantly more spill volume than a flat floor bunded unit. Furthermore, 12 vents provide the sustained airflow required for safe storage of flammable, corrosive, and volatile materials. In addition, the factory fitted lockbox and two locking bars per door secure the contents on any site.

10ft Raised Bunded Store Specifications

Condition: One-Trip (New) — Never previously loaded.

External Dimensions
Dimension Metres Feet / Inches
Length 2.99 m 9′ 10″
Width 2.44 m 8′ 0″
Height 2.59 m 8′ 6″
Internal Dimensions
Dimension Metres Feet / Inches
Length 2.84 m 9′ 4″
Width 2.35 m 7′ 8″
Height 2.39 m 7′ 10″
Door Opening
Dimension Metres
Door Width 2.34 m
Door Height 2.28 m
Construction & Bunding Features
Feature Detail
Base Unit One-trip Cor-Ten steel container
Bund Height 300mm raised bund
Bunded Floor 3mm Durbar chequer plate — welded in, liquid-tight
Total Weight 1,390 kg
Doors Exterior hinged double doors — end wall
Locking Bars 2 per door
Security Factory fitted lockbox — padlock ready
Ventilation 12 vents — high airflow for chemical storage
Forklift Pockets 2 x front — crane-free repositioning
Condition One-Trip (New)
Colour Blue
Raised Bund vs Flat Floor — What the Difference Means
A 10ft raised bunded store holds more spill volume than a flat floor bunded unit. The 300mm bund height creates a sump that runs the full internal floor area of the container — 2.84m x 2.35m x 0.3m deep. That amounts to approximately 2,000 litres of containment capacity before any liquid reaches the door seal. As a result, this unit handles the largest IBC containers, drum storage configurations, and bulk chemical inventories where a flat floor sump would reach capacity in a single drum failure event. Furthermore, under Australian Work Health and Safety regulations and the Storage and Handling of Dangerous Goods Code of Practice, bunded storage facilities must contain 110% of the largest single container volume stored. The 300mm raised bund satisfies this requirement for most standard chemical drum and IBC storage configurations without additional secondary containment.

The 12 vents provide the sustained cross-airflow that flammable, volatile, and toxic vapour atmospheres require to stay below hazardous concentration thresholds. Moreover, the one-trip Cor-Ten steel body resists corrosion from chemical vapour exposure and external weather without repainting or treatment. In addition, the forklift pockets at the front allow repositioning on any flat site without crane support — useful when site layout changes during a project.

Key Features
300mm raised bund — ~2,000L sump capacity, exceeds 110% rule for standard drums
3mm Durbar chequer plate floor — welded-in, fully liquid-tight
One-trip Cor-Ten steel — chemical vapour and weather resistant
12 vents — sustained airflow for flammable and toxic vapour management
Factory fitted lockbox — padlock security included
2 locking bars per door — double door end access
2 x front forklift pockets — crane-free repositioning
Suits chemical drums, IBCs, aerosols, and flammable liquid storage
Flat floor and open mesh bunded variants also available
Browse 8ft and 10ft Containers
Additionally, flat floor bunded stores, standard one-trip 10ft containers, and used cut-down 10ft units are available in the 10ft range. Browse our full range of 8ft and 10ft containers to compare configurations and price points in stock.

This container meets ISO 668 Series 1 freight container standards. Therefore, it is built to international structural and dimensional specifications.

Enquire About This 10ft Raised Bunded Store